| Pack Size | 4 Jacks |
| Material | Q235 Steel |
| Color | Black |
| Load Capacity | 5,000 lb per jack |
| Adjustable Height | 21.06"–34.25" |
| Top Plate Size | 5.23"×2.99"×1.45" |
| Adjustment Method | Power Drill or Hand Crank |
| Item Weight | 40 lb |

Give extended RV slide rooms extra support while parked. This set of four adjustable steel stabilizer jacks sits beneath the slide out frames to help limit rocking and shifting in campers, travel trailers and motorhomes.

Four individual jacks with round ground pads
Place the four jacks beneath suitable contact points along an extended slide room to help limit movement as people walk around inside the RV

Side shaft accepts a drill connection
A compatible power drill and socket can turn the side drive for faster setup, leaving more time for final placement beneath the frame

Telescoping tube with pin positions and upper threaded screw
Set the lower tube position with the retaining pin, then use the threaded upper section to fine tune contact within the 21.06"–34.25" height range

Flat top contact surface and broad round base
Q235 steel construction provides a 5,000 lb rating per jack, with a wide contact area designed for stationary RV slide out stabilization

The U shaped top tray measures 5.23"×2.99"×1.45", giving the frame a broad contact area. A round base at the other end helps establish a support point on firm ground

Use the drill connection when setting up several supports in sequence, or turn the hand crank when making small final adjustments near the slide out frame
| Pack Size | 4 Jacks |
|---|---|
| Material | Q235 Steel |
| Color | Black |
| Load Capacity | 5,000 lb per jack |
| Adjustable Height | 21.06"–34.25" |
| Top Plate Size | 5.23"×2.99"×1.45" |
| Adjustment Method | Power Drill or Hand Crank |
| Item Weight | 40 lb |
With four adjustable steel supports positioned under extended slide out rooms, you can create dedicated points of contact for a steadier experience when your camper or trailer is parked